-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 How many alloy locating dowels on TR6 trans
- Thread starter tdskip
- Start date
Share this page
M_Pied_Lourd
Darth Vader
Offline
2 would you like a pic?
Cheers,
Tush
Cheers,
Tush
M_Pied_Lourd
Darth Vader
Offline
Skip,
they go where the arrows are.
Cheers,
Tush
they go where the arrows are.
Cheers,
Tush
TR3driver
Great Pumpkin - R.I.P
Offline
Not sure what an "alloy" locating dowel is ... the factory used two precision 3/8" diameter hardened steel dowels on the TR3, two steel dowel bolts on the TR6.
If memory serves, the only other 3/8" holes should be for the starter unless someone has been making changes.
If memory serves, the only other 3/8" holes should be for the starter unless someone has been making changes.
M_Pied_Lourd
Darth Vader
Offline
positive 
