-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 How many alloy locating dowels on TR6 trans
- Thread starter tdskip
- Start date
Share this page
M_Pied_Lourd
Darth Vader
Offline
2 would you like a pic?
Cheers,
Tush
Cheers,
Tush
M_Pied_Lourd
Darth Vader
Offline
Skip,
they go where the arrows are.
Cheers,
Tush
they go where the arrows are.
Cheers,
Tush
TR3driver
Great Pumpkin - R.I.P
Offline
Not sure what an "alloy" locating dowel is ... the factory used two precision 3/8" diameter hardened steel dowels on the TR3, two steel dowel bolts on the TR6.
If memory serves, the only other 3/8" holes should be for the starter unless someone has been making changes.
If memory serves, the only other 3/8" holes should be for the starter unless someone has been making changes.
M_Pied_Lourd
Darth Vader
Offline
positive 
