Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
HealeyVanZet
Freshman Member
Offline
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hood BJ8
- Thread starter HealeyVanZet
- Start date
Share this page
BJ8Healeys
Jedi Warrior
Offline
It's for the curved tubes that support the full tonneau cover when the top is stowed. The tubes were original equipment for cars that had the optional tonneau cover. The sockets for the tubes are on all BJ8s whether they got a tonneau cover or not.
The convertible top helper springs attach at the bottom to a triangular plate welded to the floor behind the upholstery trim panel and at the top to a hole in the top frame. The springs are relaxed when the top is up, therefore it's easier to install them with the top up.
The convertible top helper springs attach at the bottom to a triangular plate welded to the floor behind the upholstery trim panel and at the top to a hole in the top frame. The springs are relaxed when the top is up, therefore it's easier to install them with the top up.
Attachments
Last edited:
Offline