• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Hmm. Parking Lights

Share this page

10musketeer

10musketeer

Jedi Trainee
Offline
Replaced Ignition switch and all works great. Put steering column back in and now both rear running lights, both plate lights and the front left parking light is out. The hazard switch also only works 1/3 of the time. All other lights/blinkers work great and bulbs on all are good. I tried following the diagram, but am stumped. Any thoughts come to mind? /ubbthreads/images/graemlins/confused.gif
 
Could be a loose connection on the switch/es. Had a similar situation on my 1500,connections on ignition/flasher fell off. /ubbthreads/images/graemlins/rolleyes.gif

Stuart. /ubbthreads/images/graemlins/cheers.gif
 
Check the parking light fuses and/or rear harness leg at the glove box or far right side of the dash. Red wires with fuse holders are up there.
 
Flasher unit is behind the console, I'd suspect a dodgy connection in that thing.
Never mind what I said above. Edited.
Make sure the connector block just under the dash (left side behind turn signal stalk) is in tight. Something similar happened with me recently and I had a block that wouldn't sit right after I installed a new gauge and things got moved around.
 
Back
Top