TR2/3/3A High beams seem to be stuck on when the headlights are turned on?

[karls59tr]

Pressing the floor button to lower the high beams dosn't work. Is it a failure of the switch itself or is there a procedure to track down a wiring problem?

 

[Graham H]

I would say the dip switch is faulty and should be replaced as soon as possible

Graham.

 

[sp53]

yes the dip switch

 

[Sarastro]

Had it been working previously? did you do anything with the wiring?

If the answers are yes and no, respectively, it pretty much has to be the dip switch.