• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR5/TR250 Help with Seat belts in TR250

Share this page

G

gjh2007

Jedi Warrior
Country flag
Offline
Hello:

Picked up a nice pair of retractable belts from a fellow poster for my 250 last week. PO had nothing in the car & I don't like driving around with nothing, especialy since my 13 yr old son has $3500 worth if braces in his mouth!

Anyhow, I searched all over the interior & see nothing to attach to except the large chrome nut on the wheel arc.

Here'a the deal. I have some rough meas as where things go, but could someone with a 6 that has the retractables take a clear photo of their setup? Includeing where the rewind goes, anchor, etc & some dimensions?

This woudl be greatly appreciated. I was hoping to work on the TR this afternoon.

p.s PO replaced drivers floor & lower B post leg, pass side is orig.

Thanks! /ubbthreads/images/graemlins/smile.gif
 
Hi Gary -- I'll be very interested in responses as well. I have some information, but it's from folks who previously had seatbelts installed. A TR5 owner in the UK has some good photos to use as a guide here: web page

I emailed the owner and he indicated that the car originally had seatbelts, and the outboard connection point goes into the B-post, and not the floor.

Good luck!
 
Thanks Bill & Peter, this will really help, I'll keep you posted.

/ubbthreads/images/graemlins/thumbsup.gif
 
Follow-up question to Gary's email -- when adding securon belts, do I have to put the ring through the b-pillar, or can I just go through the floor? Gary, I imagine you were wondering the same thing.

Best,

Bill S.
 
Back
Top