• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Help! melted wire in my TR6

Share this page

I already know the white wire melted a couple of wires that were touching, so at this point I know I have to at least take a small section of wrap off of the harness. What ohm reading would indicate there is a short - just anything above 0? How did you test each wire?
Kevin
 
Trying to figure what that white wire is for that far down the harness??
 
The only thing I could think of was that it has was for an optional cigarette lighter. It is tied into the switch, so I am not really sure what it would have been used for.
Kevin
 
That wire color would probably be purple ,kev.
And it wouldn't be down that far in the harness
 
Back
Top