• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR2/3/3A Help ID 56 TR3 part

Share this page

M

mallard

Luke Skywalker
Country flag
Offline
Anybody have any idea what these parts are. I found them looking for something else. I know it's for the car because of the color. I'm thinking it may be for the rear bulkhead cover because it still has some material stuck to it. The interior was out of the car when I got it so I will have many questions. Thanks for the help.
 

Attachments

  • 23149.jpg
    23149.jpg
    69 KB · Views: 373
It is possible they are the rear interior panel braces. I first thought they were exhaust hangers but if you say they have interior cloth on them I would guess some where around the back bulkhead area.

Marv
 
Looks like rear bulkhead attachment to the floor/rear deck.
 
I agree with Eric, I'm working in that area as we speak, so to speak, heh. There are two angle clips that hold the bulkhead to the floor.

Tinkerman
 
Thanks for the information guys. I was thinking the same location. Dick if you could get a picture of where the brakets go it would sure help. I don't have any holes in the back to mount the brakets to. I may have welded the holes or lost the location when I did a couple small patch repairs.
 
Keith hear are a few pics you'll have to look closely you can see them in both shots.
triumphinterior016.jpg

SDC10774.jpg
 
Thanks for the pictures Eric, very helpfull. I did not get any rear bulhhead cover with the car, the one that goes behind the seat or in the trunk. The car does have the early style rear seat. This is one area of the car that I have no idea what things should look like. Thanks again for your help.
 
Someone here has a boot tank closeout template. I had an old one to use as a pattern and made my own out of hardboard and covered with vinyl. The rear bulkhead piece is another thing all together as it is a molded hardboard in various styles according to when your car was made. As far as I know there are none of the big three that offer that. There is a possibility that someone over seas might offer it.

bootcloseout008.jpg
 
mallard said:
I may have welded the holes or lost the location when I did a couple small patch repairs.
Click to expand...
Or they may simply never have been there. According to the SPC, those brackets did not start until the TR3A.

FWIW, TRF has the trimmed panels listed separately, as well as part of their interior kits.
 
Back
Top