• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Help, can't find a part and need a vendor

Share this page

1

1michael

Freshman Member
Offline
Does anbody manufacture a replacement vacuum advance line with the end fittings. I have a 61 BT7 and the vacuum advance line is kinked and plugged. I really don't want to use rubber hose.

Michael
 
Hi Michael, I think in most cases we simply make a new one using the old one as a pattern. Most auto supply places will have the 1/8" copper tubing and the corret size Olives to fit.--Fwiw---Keoke
 
Michael: I may be missing something but I ordered a vacuuum advance line from Moss and it came with the distributor end fitting (a brass hex nut). The other end is (unless your car is different than mine) a short rubber tube, also available from Moss and other vendors. If your car has a carb-side screw-on connection (?) I think that'd be easily fashioned using the Moss tube as a base.
 
Back
Top