Brandon -
I ran a quick Google search for "Pertronix Ignitor Test" and found this:
1. Connect a jumper wire from the Ignitor Plate to battery ground.
2. Connect the Red wire from the Ignitor to the battery positive terminal along with the red lead from a volt meter.
3. Attach the Black wire from the Ignitor to the black lead of the voltmeter.
4. Move or rotate the magnet sleeve in front of the Ignitor Module, the voltmeter should vary from battery voltage to 0 volts and back.
5. If it does not, then you possibly have a burned out Power Transistor or a failed Hall cell.
There is also a youtube video test on the web, but it is in a language other than english.