• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

heater question

Share this page

JPSmit

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
just installed the heater and hoses - that engine bay is filling quickly! was looking at the heater and there is a gap at each narrow end of about 3/4 of an inch that the heater sites above the battery tray - what goes there? I have no recollection of anything being there when it came apart.

thoughts?
 
Prob was nothing there as it was foam stuff and roted quickly. Use a thinish bit of closed cell foam cut to fit. Or a peice of thick rubber if you got it.
 
My '63 didn't have that problem...I installed a Moss gasket & it fit fine.
 
Back
Top