• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

heater cable attachment bushings

Share this page

R

robert_ellison

Jedi Trainee
Offline
I am in need of the bushings that attach the ends of the heater control cable to the heater valve (round stock with hole in side for cable, screw in top to clamp).

Suggestions appreciated.
 
Cable stops should be available at hardware or auto parts stores. There is one used on the choke assy and islocated justin front of te firewall bracket. This one may be available from our usual suspects.
Alternatively, you can make then. Get a piece of threaded stand off stock at a hardware store drill a small hole in it to accept the cable, then using a Dremel cut it off to the length you want.--Fwiw--Keoke
 
Back
Top