• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

heater cable attachment bushings

Share this page

R

robert_ellison

Jedi Trainee
Offline
I am in need of the bushings that attach the ends of the heater control cable to the heater valve (round stock with hole in side for cable, screw in top to clamp).

Suggestions appreciated.
 
Cable stops should be available at hardware or auto parts stores. There is one used on the choke assy and islocated justin front of te firewall bracket. This one may be available from our usual suspects.
Alternatively, you can make then. Get a piece of threaded stand off stock at a hardware store drill a small hole in it to accept the cable, then using a Dremel cut it off to the length you want.--Fwiw--Keoke
 
Back
Top