Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Rut
Obi Wan
Offline
Tired of your plastic knobs rotating on the shaft and not controlling anything? I got fed up with replacing plastic rotary knobs and decided to remove the crappy little spring and retainer button and replace it with something more substantial. I used an angle grinder with a cutting disc to split and old screw driver bit to fill the gap so my heater knob would have something to hold on to. First I heated the bit to bright red and let it cool to make it more manageable, held it in a vise and cut it length wise, cleaned it up and cut it to fit the space once occupied by the spring. I ground mine to create a snug fit with the knob so no glue was needed...problem solved!
Rut
Rut
