• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Healey King Pins Reamed in Wa. State?

Share this page

M

mwagon

Jedi Hopeful
Country flag
Offline
Does anyone know of a source for getting BN2 King pin Bushings reamed close to Seattle area? There's a couple of the better known shops that are out of state that do it- Norm Nock & Apple Hydraulic's, but nice to find a local shop. Autosport & Action Auto are setup for it. I'd purchase the special reamer, but Moss Motor's seems to be the only source & very expensive
 
There are alternatives to the factory style dual-size reamer/pilot.

It was pretty simple turning out these pilots to provide correct alignment with standard reamers. I've done a few cars with them and no alingment issues.

hnr_022.jpg


hnr_023.jpg


hnr_024.jpg


hnr_025.jpg


hnr_026.jpg


hnr_027.jpg


hnr_028.jpg


hnr_029.jpg


hnr_031.jpg
 
Yeah, Randy, simple --- if you have a complete machine shop and years and years of incredible experience, practice, training, attention to detail, motivation, etc. etc. I am obviously in awe...
 
Thanks for the excellent feedback Randy. Do you know what size Reamers you used or clearance from the King Pin you went for?
 
Well it looks like something has been over looked. while piloted individual reamers work a treat the reamer must be adjustable. This is because King pin size can vary from one side of the car to the other. Further, this same type variation will be found in new replacements.---Fwiw--Keoke
 
Back
Top