• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Healey back folding shelf installation

Share this page

M

mmgwhite

Member
Silver
Country flag
Offline
I am gearing up to attempt install of a new back panel and folding parcel shelf in my 67 BJ8
When I got the car this was missing. I have the bare wood folding panel and proper hinges already put together and with
2 escutcheon plates but not even a vague idea where to start in order to do a proper job.
Could someone help me get started, perhaps with pictures of your properly installed back panel/parcel shelf.
I would truly appreciate any advice for this project.
Thanks
 
Do you have the metal frame that goes round the edge of the shelf ?
You also need the foam for the seat back and whatever you are using to cover it and finally the carpet piece for the shelf .
you need some upholstery skill and some contact adhesive a staple gun ..........and lots and lots of patience together with strong thumbs .
 
Back
Top