Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Bob_Spidell
Yoda
Offline
I'm doing routine pre-road trip servicing on my BJ8. A while ago I caught a technical flyer from Moss (IIRC) mentioning a newly reproduced oil pressure gauge flex line. I ordered one since AFAIK I was still running the original line. When I pulled the old one and bent it I could hear and feel it cracking--it was completely brittle and may have been leaking a little (hard to tell as there's oil from other sources on the bottom end). My BJ8 was built in November of 1966 so it's one of the 'newer' Big Healeys.
If you haven't replaced your flex line I recommend doing so. The new Moss part is smaller diameter flex line but it's teflon lined and the fittings fit up fine.
If you haven't replaced your flex line I recommend doing so. The new Moss part is smaller diameter flex line but it's teflon lined and the fittings fit up fine.
