Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
B
BUNDYRUM
Guest
Guest
Offline
I have a question about the overall height of the suction chamber of a HD8 SU on an "E" type.
This is the distance from the face of the chamber where it attaches onto the carb body with the 4 screws to where the cap screws onto.
Also if anyone knows the thread in the top of the chamber that the cap screws into that would be most helpful.
Best Regards,
bundyrum.
This is the distance from the face of the chamber where it attaches onto the carb body with the 4 screws to where the cap screws onto.
Also if anyone knows the thread in the top of the chamber that the cap screws into that would be most helpful.
Best Regards,
bundyrum.