• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

HD-6 support set

Share this page

Michael Oritt

Michael Oritt

Yoda
Silver
Country flag
Offline
Page 9 of the Moss catalogue shows a two-piece "support set" (p/n 376-098) which consists of two arms going between the intake manifold and the carb dashpots, both for the standard HD4's or M-kit HD6's. I am in need of one of these arms (1/2 of the set) and Moss is back-ordered. If anyone is willing and able to sell either one arm or the pair please reply or contact me off-list at: michael.oritt@gmail.com/305-793-9467.
 
Since posting #1 I realized the carbs are H6--not HD6, and that the two support arms are of different lengths. I seek the rear one which is sort of Z-shaped.
 
Can you be more specific about your part Michael. I have a box of redundant carb parts and may have what you want .
can you post a pic or list the part number etc for reference .
 
Can you be more specific about your part Michael. I have a box of redundant carb parts and may have what you want .
can you post a pic or list the part number etc for reference .
 
It is a metal Z-shaped flat metal support-stay about 5-3/8" long that runs between the intake manifold and the dashpot for the rear carb on an H6 carb.
Another lister has located a spare and has sent one to me.
 
Back
Top