• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Hardtop mounting hardware

Share this page

D

DanB

Jedi Warrior
Country flag
Offline
I just picked up a Parrish Plastics hardtop for my TR7. It does not appear to have the correct hardware, just some odd bolts. It looks to me like the latches on top of the windshield should be used. Does anybody have any pictures of how their top is mounted? It may be the same on a TR6, since they use the same type of latches. Also, the rear mounting points...I wouid like to see pics oh how that is supposed to be done as well.

Thanks,

Dan Blackwood
66 TR4AIRS EFE
80 TR7 DHC
 
Dan,

Welcome to the Forum. Stick around and I'm sure that a few of the resident Wedge Heads will be here soon. Sorry that I can't help with your answer.
 
The Smooth Line top is the most attractive that I've seen for the 7. This is the one made by Parrish Plastics and I'm assuming the one you have. Their website didn't seem to have too much, but might be a start to get the info you need and possibly the hardware kit you need. Good Luck
 
Thanks Brosky and Dale,

I checked out the Smoothline site, and sent for info from them. The header latches from an old soft top don't work on the Parrish top, so I assume there must have been some other hardware originally. Hopefully they will provide me some information, and may even have the hardware available.
 
HardtopClips.JPG
 
Back
Top