• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Harbor Freight Rolling Tool Cabinet

Share this page

:iagree: You could darn near live in that one. Course, it costs about as much as a small house too. :hammer:
 
Doc the second one I posted is like that one

00959931000


Also would be more comfortable with the Craftsman ,than a HF one

Need it for my metric wrenches, my metric screw drivers and my metric pliers!
 
DNK said:
Doc the second one I posted is like that one

00959931000


Also would be more comfortable with the Craftsman ,than a HF one

Need it for my metric wrenches, my metric screw drivers and my metric pliers!
Click to expand...

Don't forget the metric hammer...
 
Couldn't find that so I had to retrofit an SAE one
 
So As I mentioned in the other post I bought the HF one, dang kills me to say that.
Nother question. I have a 30" 1/2 breaker bar. It ends up on the floor or on my roll around seat. What do you guys do with yours that won't fit in the box?
It's a shin killer :cryin:
 
I built a 32" wide wooden drawer under the work bench. It's mostly for drill motors and such, but that long breaker bar fits in nicely as well.
 
30" breaker bar?!? Wow. I've not found much a 24" won't un-do.

I'd make it stand inna corner if it kicked me shins.
 
DNK said:
I have a 30" 1/2 breaker bar. It ends up on the floor or on my roll around seat. What do you guys do with yours that won't fit in the box?
Click to expand...
Cut it in half and weld in a U-joint.
 
Thanks Greg, Hmmm,,,, Don't quite know if that will work.
Won't that mess with the torqueage?
 
Back
Top