• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Hand Brake Lever Fork

Share this page

PatGalvin

PatGalvin

Jedi Warrior
Country flag
Offline
Hello everyone.

Anyone have a "Fork End to Handbrake Lever" that they are willing to part with? Part No. 27 in diagram. It appears that I was too hasty in tossing my old hand brake lever and I failed to strip it of this critical and hard to find part. Not available at any of the parts houses that I've checked (and I think I checked them all). Much appreciated.

Pat

 
Thanks John

The Ebay fork is a good fall back if I can't drum one up here on the forum. I appreciate the lead. Marv, I'll PM you.

Pat
 
Pat,

I have one. I remembered it hanging on the wall, with a broken length of cable attached to it, for the longest time. I started cleaning up some of the unusable parts a few months back. Today, I found it in the scrap metal bin. The threaded cable end was still 'froze' to the clevis, but a little heat and Pblaster freed it. Pm me with your physical address, and I'll send it to you. -My way of saying thanks for the body-work/paint videos and information you send me some time back.

Jer
 
I did not have one when I was working on my 3. I made one out of steel strap and heated and bent to make the fork and drilled a hole and put nuts on each side to lock the cable in place. Not original but works.
 
Back
Top