Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Being a Sprite guy, I do know a little about SUs but I just acquired a few boxes of old Jaguar bits. None of which will fit my 03 S Type :wink:
I have a pair of carbs, the early ones 1.75" type H.
I also have 2 intake manifolds and a few fuel system fittings.
One of the intakes has a water tube and a temp sensor in it, the other looks earlier.
I was told by the Sprite owner that he thought the parts were from an XK 120 but he was not sure.
All the parts will be going on Ebay unless anyone from this forum wants to make any offer and save me the Ebay trouble.
The carbs are clean, I disassembled them and cleaned every bit separate. Pistons work perfect, throttle shafts are very good, and the float needles even work. There are parts missing, banjo bolts, throttle links, screws for the dash pots, and who knows what else.
I also have a box of what appears to be internal engine and some suspension bolts, bits, and brackets.
Email me for more particulars Frank <spritenut@comcast.net>
I have a pair of carbs, the early ones 1.75" type H.
I also have 2 intake manifolds and a few fuel system fittings.
One of the intakes has a water tube and a temp sensor in it, the other looks earlier.
I was told by the Sprite owner that he thought the parts were from an XK 120 but he was not sure.
All the parts will be going on Ebay unless anyone from this forum wants to make any offer and save me the Ebay trouble.
The carbs are clean, I disassembled them and cleaned every bit separate. Pistons work perfect, throttle shafts are very good, and the float needles even work. There are parts missing, banjo bolts, throttle links, screws for the dash pots, and who knows what else.
I also have a box of what appears to be internal engine and some suspension bolts, bits, and brackets.
Email me for more particulars Frank <spritenut@comcast.net>
