• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

H4 Bulb Wiring

Share this page

hondo402000

hondo402000

Darth Vader
Offline
When I put my car back together after the paint job, the head lights were dim on low, I thought I had a bad ground but doing some investigating, I think I have the ground on the wrong terminal, I found a wiring diagram for the H4 bulbs
so FWIW looking at the connectors, if the diagram doesnt post correctly top terminal is low
left terminal is ground right terminal is high beam
.. low
.... _
gr | | high

so I will check when I get home

might have been wired wrong since I installed them

oops

Hondo
 
Hondo, did you remove the wiring out of the connector, because the wiring is the same
 
Yes I did, I put new connectors on with new heaver gauge wiring and relays
and for some reason I always thought the center post was the ground

Hondo
 
No it's not
a_GTBULB2.jpg
 
It's been a while and instead of trapesin down the stair,again, I thought I'd be lazy and look it up. Hope this is correct
 
hey don yes the center post is not the ground, but good to know your wiring backs up my wiring I had the ground on the wrong terminal


good to go now

Hondo
 
That ain't my wiring as I said . To lazy to go look so I just stole it off the webb
 
sorry don I need my glasses, well I found a drawing of the same seems I had the ground on the High beam side but its all good now

hondo
 
Back
Top