-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
H1 carbs
- Thread starter jmwuva05
- Start date
Share this page
SilentUnicorn
Yoda
Offline
jlaird
Great Pumpkin
Offline
H1s work almost like the H2s but not the same.
7/16 for the float gap setting and 8 flats out for initial start up.
Make sure the pistons drop nice and free as no self centering or springs here.
Throttle rods need to have a good seal at all the bearings and the butterfly also needs to close snuggly.
7/16 for the float gap setting and 8 flats out for initial start up.
Make sure the pistons drop nice and free as no self centering or springs here.
Throttle rods need to have a good seal at all the bearings and the butterfly also needs to close snuggly.