Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hi, I have a 76B that I finally got running, (kinda) my problem, on the exhaust manifold there is three openings, from back to front, the vacume line for the master cylinder, the EGR valve and a open hole where a thing called a gulp valve should go, I think. My problem, all of the polution crap has been removed, I need to cover up this hole to start the car and then uncover it to keep it running, if I plug the hole the car stalls, and it won't start if I don't plug it while trying to start it, any suggestions would be great and thanks!!
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Gulp valve
- Thread starter JMACK
- Start date
Share this page
tony barnhill
Great Pumpkin - R.I.P
Offline
You have other problems...you should be able to just plug it...spray carb cleaner all around your intake & carb to see if there's a leak somewhere.