Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have a GT6 engine in my TR6. The rocker shaft lost oil and shaft and rockers are destroyed. I'm replacing the shaft with the cheapest shaft I could find and in my pile of "somedays" (the stuff the wife calls junk) I have almost two sets of rocker arms. One type has a "spine" almost accross the top and the other type has a recess or "dish" where the oil comes out on top. Is there a real difference between the type or is it an early/late thing and is one better than the other. The originals in this engine are the "spined" type. Another question. Can I reface the area that pushes down on the valve or is it hardened. There is some wear and it makes adjusting dificult. I actually want to use the worse type since this engine is on it's last legs but I need it until I can pull the '76 TR6 engine from my '74.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
GT6 GT6/TR6 rocker arm identification and questions.
- Thread starter skikir
- Start date