• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

GT6 gt6 spin on oil conversion question

Share this page

P

pei

Member
Offline
Hi all, I just installed the flotec oil conversion kit on my GT6. The filter is positioned at 7:00. I can't even get my oil filter wrench in to tighten or loosen the filter. Any tricks or special wrench needed?
Joe
 
I use a rubber strap wrench on mine. Granted, the filter can only be moved a small distance before the wrench must be re-positioned.
strapwrench.jpg
 
Mike, mine's actually a Mocal. I purchased it from British Victoria. Because of the GT6's frame rail, the adapter is installed hanging the filter at the 7:00 position. With the steering column on that side it's a tight fit.
 
Back
Top