• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

GT6 gt6 spin on oil conversion question

Share this page

P

pei

Member
Offline
Hi all, I just installed the flotec oil conversion kit on my GT6. The filter is positioned at 7:00. I can't even get my oil filter wrench in to tighten or loosen the filter. Any tricks or special wrench needed?
Joe
 
I use a rubber strap wrench on mine. Granted, the filter can only be moved a small distance before the wrench must be re-positioned.
strapwrench.jpg
 
Mike, mine's actually a Mocal. I purchased it from British Victoria. Because of the GT6's frame rail, the adapter is installed hanging the filter at the 7:00 position. With the steering column on that side it's a tight fit.
 
Back
Top