-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
MGB-GT GT floor pans
- Thread starter Dennis P
- Start date
Share this page
Offline
Dennis
The floors on the GT are still structural as on the roadster, although they are not as critical, the roof giving a degree of rigidity. If the rockers are rusty, then replace them, they are not expensive, and if you can weld then the time involved is not such an issue. It would cost you more in the long run to try fabricating chassis rails. Sorry to bear bad news, but it's just not worth cutting corners.
Steve
The floors on the GT are still structural as on the roadster, although they are not as critical, the roof giving a degree of rigidity. If the rockers are rusty, then replace them, they are not expensive, and if you can weld then the time involved is not such an issue. It would cost you more in the long run to try fabricating chassis rails. Sorry to bear bad news, but it's just not worth cutting corners.
Steve