• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Grommet in rear battery cable panel

Share this page

AUSMHLY

AUSMHLY

Yoda
Country flag
Offline
64 BJ8. Is Moss' part number 680-288 grommet kit used in the rear battery cable panel?

If that is correct, does the outer metal grommet ring get screwed through the Armacord, or does the Armacord get glued on top of it, so you don't see it.

Thank you, Roger
 
Hi Roger,
Looks like the metal grommet bracket goes under the Armacord. In this photo, you can see a slit cut in the material. In the Anderson/ Moment guide, page 179, the Armacord has a round hole cut so only the rubber grommet is showing, not the metal.
203243-batwire.jpg
 
Back
Top