• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR6 Greasing the TR6 urgent help needed

Share this page

hondo402000

hondo402000

Darth Vader
Offline
I decided to grease all the joints today and got most done but I cant seem to figure out how to grease the rear half shafts the slip joints in particular, there are no grease nipples need some help as I am doing it now,
 
I don't think there is any simple way to grease the slip joints with the shaft on the car - you would have to remove the rubber boots which I wouldn't want to try with the shaft on the car.
 
well I pulled the boots back and put some grease on it , probably not the best way to grease then but not pulling them of the car at this point I will wait till I pull the diff to have it rebuilt and then grease them, I might ever drill and add grease nipples too
 
Back
Top