-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Goodbye TR3A
- Thread starter griff
- Start date
Share this page
Moseso
Jedi Knight
Offline
Griff --
So glad to hear that you're going to be able to run and jump and play like all the other boys. I did the other end of my spine (L3 & 4) and a couple of ribs, in a TR3, in 1972. Toasted the car -- I recovered fully. There was nothing wrong with the car -- the loose nut behind the wheel was at fault.
The lesson for us all can't be restated too often. Working on/with power tools is a life of constant vigilance. Cars are power tools, just like table saws. You're NEVER too old or experienced too invoke the basic safety rules.
So glad to hear that you're going to be able to run and jump and play like all the other boys. I did the other end of my spine (L3 & 4) and a couple of ribs, in a TR3, in 1972. Toasted the car -- I recovered fully. There was nothing wrong with the car -- the loose nut behind the wheel was at fault.
The lesson for us all can't be restated too often. Working on/with power tools is a life of constant vigilance. Cars are power tools, just like table saws. You're NEVER too old or experienced too invoke the basic safety rules.
tinman58
Jedi Knight
Offline
Wow Griff what sad news!! The good news is that you ar still alive. I just went out and checked all the lug nuts on my TR and all eight lugs on the rear wheels were (not) tight. With your post as sad as it is to lose a TR3 you may have saved a life or two. For that we all thank you. Roll bars are only as good as how they are mounted. Mine WAS mounted by six bolts to the tub sheet metal, I doubt that it would have done anything but make a solid place for a head to smack. Sorry about your TR but glad you are here to tell us about your experince.
V
vagt6
Guest
Guest
Offline
Griff, very, very good that you're still on the green side of the grass, and well. So sorry about your TR.
Look at it this way: you took the journey of restoration, you'll never forget that. Maybe someday, there'll be another lovely Triumph in your garage.
You never know . . .
Good luck to you, man. Don't be a stranger. :thumbsup:
Look at it this way: you took the journey of restoration, you'll never forget that. Maybe someday, there'll be another lovely Triumph in your garage.
You never know . . .
Good luck to you, man. Don't be a stranger. :thumbsup:
I'm glad you are on the mend.
After I rebuilt the engine in my Nissan truck, I took a quick trip to check it out. Less than two blocks from home, I hear an odd noise and stop. Don't remember how I realized what it was, but the lugs on both front wheels were loose. I quess I had forgotten to tighten them more than hand tight.
After I rebuilt the engine in my Nissan truck, I took a quick trip to check it out. Less than two blocks from home, I hear an odd noise and stop. Don't remember how I realized what it was, but the lugs on both front wheels were loose. I quess I had forgotten to tighten them more than hand tight.
PeterK
Yoda
Offline
My first drive in a TR was a man who offered to let me drive his nicely restored 4A.. He drove out a couple of miles, pulled over, and let me drive back. As I drove he said I didn't get the 50 cent drive because he didn't know me and if I would like the speed.
I drove cautiously never haven driven a TR before. They had a very long gravel drive and we heard a noise as I turned hard into his garage. When we got out we noticed the driver side rear wheel lug nuts were nearly off (coincindence) and the wheel tilted out at the bottom and nearly off. Luckily for us and the 4A there was no damage done.
It happens, not your fault, not his. Really sorry for your loss - I know I spend a lot of time making my cars a certain way and I am very anxious to drive my 4A for the first time.
I drove cautiously never haven driven a TR before. They had a very long gravel drive and we heard a noise as I turned hard into his garage. When we got out we noticed the driver side rear wheel lug nuts were nearly off (coincindence) and the wheel tilted out at the bottom and nearly off. Luckily for us and the 4A there was no damage done.
It happens, not your fault, not his. Really sorry for your loss - I know I spend a lot of time making my cars a certain way and I am very anxious to drive my 4A for the first time.
Twosheds
Darth Vader
Offline
TFB said:
I attended a Human Factors in Aviation seminar at which they stressed a policy called "All the Way On or All the Way Off". For example don't put a cylinder on and snug up the nuts and quit for the day without torquing them.
This is especially important in shops that have employees working in shifts.