• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

GM Tool J-35621

Share this page

PAUL161

PAUL161

Great Pumpkin
Silver
Country flag
Online
Installation tool for the rear crank seal on a Chevy 5.0 and 5.7 liter engine. I know how to do the job, I'd like to know who rents this tool? I don't feel like paying $130.00 to buy one for a one time use! Anyone know who rents them? PJ
 
Before using this tool,check out LS1Tech.com for problems people are having using this tool. There are some good methods for installing the seal without the tool. Hope this might help.
 
Thanks John! Just found out that that there's a NAPA dealer close by that rebuilds engines. I checked with them and was told the tool was not needed. Just unbolt the retaining plate and install the new seal in it on the bench. Worked great! New seals in and the trucks back on the road, with no leaks! PJ
 
Back
Top