• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Glove Box picture needed

Share this page

Stewart

Stewart

Darth Vader
Country flag
Offline
I'm trying to figure out how to mount the wire/rod that limits the amount the glove box lid will open. I know how it mounts to the lid but how does it mount to the box? Mine hasn't had one installed for as long as I can remember 20+ years. If any one has a picture of the mounting point I would be very greatfull.
 
I didn't know there was a limiting strap... but the 77 has the later dash.
 
gbox1c.jpg
 
Very near the same thing the CB cars used. Is yours riveted to the inside of the box, Paul?

The earlier cars had it as an extended piece of the dash stamping.
 
My '73 seems to have the exact same setup as Paul shows in his picture. In my case the wire isn't riveted, it sorta loops into the little opening in the door.

R.
 
It's an original 72.
 
The bracket mounted in the box is held in with self-tapping screws that also hold in the box-liner. At least that's what's on my '74.
 
Back
Top