Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Had to replace the glove box lock on my 76 TR6 and door will no longer pop open. There has been some discussion about a finger pull but a 76 never had one (i am original owner). My TR4A had one and early 6s may have but by 76 they were gone. Tried adjusting the catch at the top of the glove box opening without any success. Someone suggested adjusting the spring loaded glove box light switch but it is not really adjustable. I have to put key into the lock cylinder and use it to pull the door open which is not really feasible when the key is on a ring with the ignition and I am driving. Any suggestions?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR6 Glove box lock.
- Thread starter MI76TR6
- Start date
Share this page
trglory
Jedi Trainee
Offline
There should be a metal tab in the upper left hand corner that is attached to the back of the wooden dash board. The tab has a hole in it which will accept a pull-through rubber buffer. That buffer will put enough pressure on the door to pop it open when the latch is released.
