• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

General Tech Getting the nut off for J Type drive shaft flange

Share this page

Got_All_4

Got_All_4

Luke Skywalker
Country flag
Offline
Having a hard time breaking the nut loose for the drive shaft flange on my J type overdrive. The unit is off the transmission and is now being held in my big vice. Tried 1/2" impact, 20" breaker bar. About ready to use an extension bar and thought I'd better ask first. I think I'm going the right direction counter clockwise.
 
Sounds right to me. I used a 25" bar and still had trouble. Also made up a long bar to bolt to the flange, so I could push and pull in nearly the same axis (for more torque).

Here's a shot of the same bar, working on one of the drive flanges on the diff (much easier to get off).
 
Don't know why, might be those TR gods at night but gave it more try this morning before I used Randalls set up and it came off with minimal effort.
 
Back
Top