Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Oldcarhobby
Freshman Member
Offline
Hello, upon cleaning my engine I noticed that the top wire on the generator is very loose ( wiggles),
it appears that it is the spade that is loose and not the wire connection to the spade . The spade appears to be secured from the inside of the generator . Does anyone happen to know how that spade
is secured to the inside generator on the backplate ? Nut, rivet , etc ? .. upon further observation it looks like the spade comes through the back plate in a plastic type fitting . Possibly the fitting has just deteriorated over the years .... Any & all information is greatly appreciated. The charging system is functioning fine . Many Thxs
it appears that it is the spade that is loose and not the wire connection to the spade . The spade appears to be secured from the inside of the generator . Does anyone happen to know how that spade
is secured to the inside generator on the backplate ? Nut, rivet , etc ? .. upon further observation it looks like the spade comes through the back plate in a plastic type fitting . Possibly the fitting has just deteriorated over the years .... Any & all information is greatly appreciated. The charging system is functioning fine . Many Thxs
