• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Generator pulley for 65 3000?

Share this page

L

Legal Bill

Jedi Knight
Country flag
Offline
Hello everyone. I have not been on here for a couple of years, I think. I was wondering if anyone knows where I could get a pulley for the 65 3000 MK III? By way of background, tis is a peculiar one year pulley. It is for MIIIs that run the 3/8 belt. I know some of you will think I can use any big healy 3/8 pulley, but the earlier pulleys won't fit the shaft of the later generator.

If any of you know where i could get one, or have one, please let me know. If need be, I'll buy the whole generator.

Thanks for your time.


Bill
 
:savewave:


Hi I have never had any problem fitting generator pulleys on to my 1966 BJ8's. AS a matter of fact to speed the generator up I run 1/2'PULLEYS WITH THE 3/8 " BELT. hOWEVER. I THINK YOU WILL BEABLE TO LOCATE ONE EITHER ON e-bAY OR from British Car specialties.Fwiw--Keoke
 
No luck on e-bay. Good call on BCS. I'm trying to find one for a reasonable price. I'll probably end up with one from BCS, though.
 
Back
Top