• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Gear reduction starters anyone?

Share this page

JPSmit

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
My car doesn't start that easily when it sits for a while and I am beginning to wonder if this would help.

1. If you have one what has been your experience and

2. why is it $100 more expensive at Moss (other than err Moss)

mossmotors.com

High Torque Starter by WOSP Performance

STARTER, HIGH TORQUE
mossmotors.com mossmotors.com

www.classiccarperformance.com

MG Midget - High Torque Starter - BritishStarters.com

High Torque Gear Reduction Starter for the 1275cc and 1500cc MG Midget.This modern starter will amaze you everytime you turn the key. No longer will you have to cross your fingers, and hope that your car will start. Benefits of upgrading to our Gear Reduction Starter: Spins your motor faster at...
www.classiccarperformance.com www.classiccarperformance.com
 
Got tired of playing "Ring Gear Roulette" with the B, didn't fancy pulling it apart for a replacement so put a WOSP starter in a couple years ago. Works fine. As for expense, even the Moss unit was still less time/effort/money than the job of pulling engine/trans, AFAIC.
 
also check bpnorthwest.com for pricing. Good company.
I have that starter on 3 vehicles. Much easier starting. But everything else has to work also
 
I put one in a couple of years ago and have never regretted it. Like doc I got tired of pulling and reinstalling the original boat anchor starter. I paid $230 for mine. As you can see from the pic the new starter has multiple mounting holes to allow for the perfect fit. As a bonus it’s smaller and lighter.

47259E32-9217-405F-B074-342B2CEEBB92.jpeg
 
gonzo said:
Yes, please! Gear and weight reduction with reliability. Sourced mine here for under $200 a few years ago now. > Austin Healey 100, 100/6, 3000 - High Torque Starter <
Click to expand...
I'd guess the gear reduction unit weighs about HALF what the original does. Only "risk" with the new motor is the position of the hot lead. Make sure to put the supplied rubber boot over the connection. On the B engine, the distributor cap clip can inadvertently drop down and contact the connection. Not sure about the 1500, but a consideration.
 
Back
Top