• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Spitfire Gas tank

Share this page

FlyingCat

FlyingCat

Jedi Hopeful
Offline
I've installed a new gas tank and a new sending unit. Should I use a gasket sealer with the sending unit? And if so, what kind? Thanks!

IMG_2963.jpg


And can anybody tell me how to keep the program from rotating my pictures!
 
Generally if you are fitting a new gasket to the tank it is only necessary to make sure the mating surfaces on the tank and sending unit are both clean and free of rust and other deposits. No sealant is necessary if the surfaces have no pits.

If there is a little bit of pitting you can use Hylomar or Permatex PermaShield (#85420). The Permatex sealant is available in some stores. I have ordered it through Amazon.

Do NOT try and improvise with RTV silicone. RTV is not fuel compatible.
 
Back
Top