Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
swift6
Yoda
Offline
I'm a Triumph Owner but this is a TF that I would own and drive. Thought I would share some details of it for you MG folks.
An LBC shop in Fort Collins has modified a TF for the owner that really updates it. It's not quite finished yet but is driveable and could be considered finished. They did not butcher an original TF, it had been previously modified. When it arrived at the shop it had a Sunbeam Alpine engine in it and the guages had been switched to different round units as well as opposed to the octagonal units. It now has a warmed over MGB 1800 engine, making about 130hp at the flywheel, backed by a Datsun 5-Speed conversion. This car is an absolute blast to drive! I've driven standard TF's as well and the difference is amazing. It will cruise comfortably at 75mph and has no issues climbing through the foothills of the Rockies. /ubbthreads/images/graemlins/driving.gif
Now to the unfinished part. It is still using the standard TF brakes and rear axle. The shop is trying to convince the owner to update the front brakes to MGB disc's at the very least and possibly to swap in an MGB rear axle for better gearing as well since the TF's low rear end gearing is no longer needed with the power of the new engine.
I don't have any pictures to share yet but will try and post some for you all. The whole job has been done very profesionally and is really top notch. It also generates tons of smiles from whoever drives it.
/ubbthreads/images/graemlins/cheers.gif
An LBC shop in Fort Collins has modified a TF for the owner that really updates it. It's not quite finished yet but is driveable and could be considered finished. They did not butcher an original TF, it had been previously modified. When it arrived at the shop it had a Sunbeam Alpine engine in it and the guages had been switched to different round units as well as opposed to the octagonal units. It now has a warmed over MGB 1800 engine, making about 130hp at the flywheel, backed by a Datsun 5-Speed conversion. This car is an absolute blast to drive! I've driven standard TF's as well and the difference is amazing. It will cruise comfortably at 75mph and has no issues climbing through the foothills of the Rockies. /ubbthreads/images/graemlins/driving.gif
Now to the unfinished part. It is still using the standard TF brakes and rear axle. The shop is trying to convince the owner to update the front brakes to MGB disc's at the very least and possibly to swap in an MGB rear axle for better gearing as well since the TF's low rear end gearing is no longer needed with the power of the new engine.
I don't have any pictures to share yet but will try and post some for you all. The whole job has been done very profesionally and is really top notch. It also generates tons of smiles from whoever drives it.
/ubbthreads/images/graemlins/cheers.gif
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.