• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Fuel injection hose

Share this page

W

Winston

Jedi Trainee
Offline
I've been pondering replacing the 40 year old fuel line(s) with.0008 fuel injection hose.
I don't like the fact that it detracts from the original design, but I am on a very strict budget.
I wonder about fuel volume to the Stronbergs, to much/to little?
I believe the fuel pump (mechanical) puts out about 1 1/2 to 2 pounds of pressure I'm concerned about the pump's ability to pressurize the system.
The reason I am considering is the almost 40 year old line is very brittle and does have a small leak.
I intend to replace with new as I can afford it but would this give me a short term fix.

Thanks

Winston 67TR4A IRS
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Winston:
I've been pondering replacing the 40 year old fuel line(s) with.0008 fuel injection hose.
<hr></blockquote>

I'm guessing that ".0008" is a typo (that would be a *very* tiny line).
Anyway, replacing the old fuel line is a good idea. Most of the fuel hose on your car is probably around 1/4" (inside diameter). There are a number of other standard sizes available, so you should measure what you have. This hose can be bought cheaply at most discount automotive stores. I changed all of mine a few years ago....I think it cost me less than $10 (USD).

[ 04-13-2004: Message edited by: aeronca65t ]</p>
 
An embarrasing typo at that.
SAE 5 1/6".
Little bit of concern in the area where the fuel line rounds the thermostat housing.


Winston 67TR4A IRS
 
Back
Top