• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Fuel Injected Midget Up-date

Share this page

Re: Fuel Injected Midget Update

That is a pull through system. Since you are using the MegaSquirt, wouldn't it be easy to make a blow through system? Then the manifold costs are small, and you could incorporate an intercooler.
 
Re: Fuel Injected Midget Update

Absolutely. Unless packaging constraints are an issue I wouldn't do it that way; it was just something to look at.

You'd need to make a few changes to the carb body to handle the pressure if you do a blow through is all.
 
Re: Fuel Injected Midget Update

Ahh, true. You would need to seal the throttle shaft and such.
 
Back
Top