• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

frozen distributor on 69 mgb

Share this page

B

bmarkle69mgb

Freshman Member
Offline
Anybody have a magical tool for removing a distributor that is frozen in the block on a mgb. I sprayed it as best I can with PB Blaster & Kroil, but you really can't see if you are getting it in the joint. I tried pry bars, but can't get any leverage. I broke one ear off the distributor cap holddown clip, so I gave up on the pry bars. I did not look to see if I can get some type of strap wrench on it.

Any ideas. /ubbthreads/images/graemlins/confused.gif
 
It's out. I got strap wrench on it and that broke it free. The strap wrench was the nylon strap type that you can put a 1/2" socket wrench on it.
 
Yup... sorry for not seein' your post earlier. Twist, don't pry... rats... ratsratsrats... sorry. /ubbthreads/images/graemlins/frown.gif
 
Back
Top