-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
front wing repair panel
- Thread starter griff
- Start date
Share this page
Alan_Myers
Luke Skywalker
Offline
Hi griffedi,
While I'm not familiar with the patch panels those vendors are currently selling, I can tell you this is a good way to make the repair, so long as the seam can be well hidden (depending upon how much originality concerns you).
I would expect the vendors to sell proper gauge steel, which might be a little hard to find locally to make your own patch panels. Even if not already flanged, that's a minor consideration and any trimming would remove the flange, anyway.
Flanging tools are easily found from a variety of sources. There are bench-mount and handheld type. Also, Eastwood Co., Northern Tool and Harbor Freight all offer air tools that both flanges and punches holes for plug welds (or for glue/rivets, if that's the way the repair is being done, although it wouldn't be my personal choice).
Assuming you get some sort of flanging tool, whatever one you choose, be sure to confirm it can handle the 18 gauge steel TR bodies are made from. Most modern cars use lighter 20 to 24 gauge steel and some tools just aren't up to working with the heavier gauge stuff.
Hope this helps!
/ubbthreads/images/graemlins/cheers.gif
While I'm not familiar with the patch panels those vendors are currently selling, I can tell you this is a good way to make the repair, so long as the seam can be well hidden (depending upon how much originality concerns you).
I would expect the vendors to sell proper gauge steel, which might be a little hard to find locally to make your own patch panels. Even if not already flanged, that's a minor consideration and any trimming would remove the flange, anyway.
Flanging tools are easily found from a variety of sources. There are bench-mount and handheld type. Also, Eastwood Co., Northern Tool and Harbor Freight all offer air tools that both flanges and punches holes for plug welds (or for glue/rivets, if that's the way the repair is being done, although it wouldn't be my personal choice).
Assuming you get some sort of flanging tool, whatever one you choose, be sure to confirm it can handle the 18 gauge steel TR bodies are made from. Most modern cars use lighter 20 to 24 gauge steel and some tools just aren't up to working with the heavier gauge stuff.
Hope this helps!
/ubbthreads/images/graemlins/cheers.gif
D
DougF
Guest
Guest
Offline
The patch panels from TRF that I have purchased in the past are of excellent quality. I'm certain they haven't changed the tooling.
The wheel arch side has the bead. The door side must be finished. This is necessary since no two fenders for a 3 are identical.
I feel that they are well worth their money.
The wheel arch side has the bead. The door side must be finished. This is necessary since no two fenders for a 3 are identical.
I feel that they are well worth their money.
Harry_Ward
Jedi Knight
Offline
I purchased rocker panels from Moss and found them to be of excellent quality and rust free. I would assume the wing repair panels would be of the same quality. I made my own repair panels for the wings but at that time I had a friend who had a sheet metal brake which made for easy bending. If I had to do it again I probably would have looked for a set of good used wings (if you can find any). Is it worth buying repair panels...Probably but you will miss all the extra fun of making them yourself and applying band aides to your fingers for all those little cuts (wear gloves)!
I have a mig welder and it was very time consuming welding those repair panels onto the wings. If you go to fast you will distort the steel and have to beat it to death or start over. Also try and get your repair panel as high up on the wing as possible if you are too low you will find that the gauge of the wing panel will be to thin due to rust removal (not easy to weld). Do not cut anything! Especially the repair panel until you have dry fitted prior to welding!
Try to cut the wing as low as possible (visual thing) and work your way up if need be to thicker steel. Not sure if the store bought repair panels come with a pre-bent edge for butt welding but if not you may want to consider creating one. I think they mixed rust into the sheet steel they used to build my car and that made the welding part even more fun. Best to tack at seven inch intervals and come back well after the steel has cooled.
Anyway probably more info than you wanted but I remember this fun repair fondly and wanted to share. It's also best not to wear sneakers while welding either!
Have fun,
Harry
CT
I have a mig welder and it was very time consuming welding those repair panels onto the wings. If you go to fast you will distort the steel and have to beat it to death or start over. Also try and get your repair panel as high up on the wing as possible if you are too low you will find that the gauge of the wing panel will be to thin due to rust removal (not easy to weld). Do not cut anything! Especially the repair panel until you have dry fitted prior to welding!
Try to cut the wing as low as possible (visual thing) and work your way up if need be to thicker steel. Not sure if the store bought repair panels come with a pre-bent edge for butt welding but if not you may want to consider creating one. I think they mixed rust into the sheet steel they used to build my car and that made the welding part even more fun. Best to tack at seven inch intervals and come back well after the steel has cooled.
Anyway probably more info than you wanted but I remember this fun repair fondly and wanted to share. It's also best not to wear sneakers while welding either!
Have fun,
Harry
CT
Alan_Myers
Luke Skywalker
Offline
Hi,
I dunno, but imagine it does.
You might want to contact TRF Level II sales via email or phone with some of these questions. John (who usually handles these sorts of inquiries) will give you far better answers than we can.
/ubbthreads/images/graemlins/cheers.gif
I dunno, but imagine it does.
You might want to contact TRF Level II sales via email or phone with some of these questions. John (who usually handles these sorts of inquiries) will give you far better answers than we can.
/ubbthreads/images/graemlins/cheers.gif