• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A front suspension

Share this page

F

flyingbp

Freshman Member
Offline
vertical link will not screw in more than 3 to4 threads to lower trunnion tryed grease no luck, threads in fine to old trunnion. purchased part from reputable supplier.
icon7.png
 
When I restored my car 3 years ago, I had to send back 3 sets of trunions for issues like you are experiencing. My problem was the threads in the trunnion were more sloppy than the original trunnion I was replacing. It sounds like the machining precision of the new trunnions still has not been addressed...
 
I just installed a new set of trunnions on a TR3. They were from TRF and fit fine onto the vertical link.
Charley
 
You may also have a bent verticle link, look closely at the shaft and see if you can detect anything. My TR4 had that issue, would not screw all the way in - it was bent.
 
Back
Top