• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Front suspension inner Lower wishbone bush area?

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
Are the nylon"washers"(Moss diagram part # 115) supposed to be somewhat loose. I noticed that they could be moved from side to side a bit yet the fulcrum nut that holds the bracket seems to be torqued the correct amount.
 
You have the nylon washers on both sides, and part 123 the right way around? I dont recall this being loose when I did mine.
 
They are a sliding fit. Not a rattle fit, but no press needed. Cheap so replace. Grease both sides when installing.
 
You did a trial installation without the arms? I never tried the bushings without the arms, so I don't know if they are loose inside the arm or not.
 
Back
Top