• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

front shroud work in Northwest

Share this page

O

OlyHealey

Freshman Member
Offline
Anyone know of a shop in the NW that is really good at dealing with big Healey shrouds? the shroud on my BJ8 is really rough and probably has to have some donor panels incorporated.
 
Contact Tom Monaco at Tomsimport.com. He's extremely Healey knowledgeable, fair, honest and in Portland, OR.
I send my stuff clear across the country to work with him! And his wife Skip is a doll to boot.
Best of luck,
Rich
57 Longbridge BN4
My progress
 
I've got just the guy, if you want it done right. Not cheap, but fair and excellent quality. He just completed the work on my '57 100-6 MM vintage racer after my "off" at Sears Point last year. Curtis Patience, https://www.juicebrakes.com/, he's here in Portland. Send Boy Racer (Richard Mayor) a PM, you may be able to rent his shroud jig which Curtis used to resort mine. See below
 
"shroud jig"

Now that's First Class! Way to go Richard!

Dougie, are you using a "spare" shroud now, or have been sidelined since The Off?
 
Randy -

Curtis got me "all straighten-out" using my original shroud. See the before and after attachment in my last post. Dropping the motor back in today and should be ready for the season opener June 29th-July 1st.
 
Back
Top