Offline
When I re installed my front springs on the TF, I measured them for height and they were both the same, but the right side sets slightly higher than the left. I miked the coils and the right spring coils are .008 thicker than the right! Could the right spring be from an MGB put in there in the past? PJ
Note, Moss part numbers are different for the TF and MGB. In fact I notice MGB uses two different springs, one for the CB cars and another for the RB cars.
Note, Moss part numbers are different for the TF and MGB. In fact I notice MGB uses two different springs, one for the CB cars and another for the RB cars.